h1

Plaster Coated Paper for Gouache Paint

May 4, 2017

As I get ready to prepare the surface for my new painting, I wanted to test out a ground to use especially for the grass area I’ll be painting. I’ll be using a large sheet of illustration board, and coating it with a thin ground made with spackling compound.

Spackling is a paste made out of (typically) calcium carbonate, silica, and glycol. You can find it at hardware stores, and it’s used for filling small holes and cracks in walls prior to painting. It can be thinned with water. I’ve added a small amount of acrylic medium to improve the adhesion and make it more flexible. In the picture above, I’ve drawn an area in pencil to show the rough texture it makes. It feels like a fine grit sandpaper. I applied just one coat. It creates a nice paint ground, but can lift if you use a very wet wash. Adding acrylic medium helps prevent that.

The main reason I’m using this particular ground is to allow me to lightly scrape away paint layers. You can see the marks I’ve made on the small test area of gouache paint in the picture. It will help me create a more convincing grass texture. The tools I used here are a bamboo pen and a solder scraping brush. The bamboo doesn’t dig too deeply into the plaster, and the steel brush gives a fuzzy, random scratch. I’m using various commercial gouache paint, as well as a couple of my own. This should work well for me.

UPDATE:
I’m adding a closeup of the painted area to show the scratch marks better.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: