I drove a friend to the airport a couple days ago, and decided to stay and make a few pencil sketches. Here are a couple of the better ones.
Archive for May, 2016
One of the unique tricks to building a frame for a drawing is cutting the acrylic glazing sheet. The tool most often recommended for this procedure is a special hooked knife designed just for this, but I can’t comfortably tell you the number of times that has gone wrong for me. You have to score the acrylic in several passes, it’s hard to keep a straight line on the smooth sheet, and it almost never snaps cleanly. Fortunately, I’ve discovered it’s much easier to do this with a tablesaw. Acrylic will not cut like wood, however. If you try to cut all the way through, the blade will just destroy the sheet. Here’s how I do it.
First, I’ve cut some cardboard to the size of the frame interior to use as a guide, taping it to the edges of the acrylic. I’ve also taped some newspaper to the front to protect the acrylic from getting scratched while pushing it on the table.
Set the blade depth to cut no more than halfway through the acrylic. Just like using a knife, you only want to score the sheet, not cut all the way through in one pass.
The acrylic snaps off easily. There will be a few rough burs along the edge, but that will scrape off easily with a utility knife, and get smooth with some sand paper. You can also flip the sheet over, and carefully saw off any excess on that side.
Here the sheet is placed in the back of the frame. By the way, that’s my new frame I bought the other day all glued together. I just need to insert the artwork and fix the backing.
Well, that was quick. The order I made of cut frame pieces was delivered by FedEx today, just 2 days from Illinois to Texas by ground service. They were packed in a cardboard box (I was expecting a mailing tube) wrapped and stuffed in brown paper.
I’ve just roughly dry fit the pieces together to see how it looks, and the edges are sharp and clean. I may want to go with a wider trim than these now that I see it better, but I’ll go ahead an glue it to get a better idea.
Here it is in my strap clamp, and you can see that the corners fit very well. So far, I’m very pleased with Framing4Yourself, and would recommend them for custom framing material.
I’m getting some art ready for an upcoming show, and I wanted to include the recent portrait I drew in the submission. It’s a non-standard size, so I could take it to a local shop for framing, or make it myself. Instead I thought I’d try out an online store a friend recommended called Framing4Yourself.
They offer all the materials you need to make a frame, from cutting the molding to your measurements, to all the tools you need to put it together. I already have everything else, so I just ordered the pre-cut molding. The cost was reasonable and comparable to hunting down the molding or getting the frame built locally. It should arrive in a few days, and I’ll give a review then.